如何使用STATECAD進(jìn)行多狀態(tài)機設計實(shí)例分析
加入技術(shù)交流群
Dcounter0,Dcounter1 : OUT Std_logic);
SIGNAL BP_dcounter0,BP_dcounter1,Readcounter0,Readcounter1: Std_logic;
END;
ARCHITECTURE BEHAVIOR OF SHELL_DUOZTJI IS
SIGNAL Sreg : Std_logic_vector (1 DOWNTO 0);
SIGNAL Next_sreg : Std_logic_vector (1 DOWNTO 0);
CONSTANT M0full : Std_logic_vector (1 DOWNTO 0) :="00";
CONSTANT M0writewait : Std_logic_vector (1 DOWNTO 0) :="01";
CONSTANT STATE0 : Std_logic_vector (1 DOWNTO 0) :="10";
CONSTANT Write0 : Std_logic_vector (1 DOWNTO 0) :="11";
SIGNAL Sreg1 : Std_logic_vector (1 DOWNTO 0);
SIGNAL Next_sreg1 : Std_logic_vector (1 DOWNTO 0);
CONSTANT M0empty : Std_logic_vector (1 DOWNTO 0) :="00";
CONSTANT M0readwait : Std_logic_vector (1 DOWNTO 0) :="01";
CONSTANT Read0 : Std_logic_vector (1 DOWNTO 0) :="10";
CONSTANT STATE1 : Std_logic_vector (1 DOWNTO 0) :="11";
SIGNAL Next_BP_dcounter0,Next_BP_dcounter1,Next_readcounter0,
Next_readcounter1 : Std_logic;
SIGNAL BP_dcounter : Std_logic_vector (1 DOWNTO 0);
SIGNAL Dcounter : Std_logic_vector (1 DOWNTO 0);
SIGNAL Readcounter : Std_logic_vector (1 DOWNTO 0);
評論