單片機模擬I2C讀寫(xiě)E2PROM

//Author: Ares
//Date:2005.11.4

＃i nclude
＃i nclude

sbit SDA=P2^5;
sbit SCL=P1^0;

#define uchar unsigned char
#define uint unsigned int
#define byte unsigned char

void delay()
{
_nop_();
_nop_();
_nop_();
_nop_();
_nop_();
}

void delayms (uint x)
{
byte j;
while(x--){
for(j=0;j<125;j++){;}
}
}

void I2C_Start()//I2C START
{
SDA=1;
_nop_();
SCL=1;
delay();
SDA=0;
delay();
SCL=0;
_nop_();
}

void I2C_Stop()//I2C STOP
{
SDA=0;
_nop_();
SCL=1;
delay();
SDA=1;
delay();
}

bit I2C_ReceiveAck()
{
bit ck;
SDA=1;//THE HOST RELEASE THE BUS
_nop_();
_nop_();
SCL=1;
_nop_();
_nop_();
ck=SDA;
_nop_();
_nop_();
SCL=0;
_nop_();
return(ck);
}

void I2C_SendAck()

{
SDA=0;
_nop_();
_nop_();
SCL=1;
delay();//remain
SCL=0;
_nop_();
_nop_();
}

void I2C_SendNoAck()

{
SDA=1;
_nop_();
_nop_();
SCL=1;
delay();//remain
SCL=0;
_nop_();
_nop_();
}

void I2C_SendByte(byte SData)
{uchar i;
for(i=0;i<8;i++)
{ SDA=(bit)(SData&0x80);
SData=SData<<1;
SCL=1;
delay();
SCL=0;
}
}

byte I2C_ReceiveByte()
{uchar i;
byte RData;
RData=0;

for(i=0;i<8;i++)
{ SDA=1;
_nop_();
SCL=1;
_nop_();
_nop_();
RData=RData<<1;
RData=RData|SDA;
_nop_();
_nop_();
SCL=0;
}
return(RData);
}

void I2C_SendToSubAddress(byte SlaveAddress,byte SubAddress,byte *pSData,uchar N)
{uchar i;
I2C_Start();
I2C_SendByte(SlaveAddress);//send slave address(write device)
I2C_ReceiveAck();
I2C_SendByte(SubAddress);//send sub address
I2C_ReceiveAck();

for(i=0;i{
I2C_SendByte(pSData[i]);
I2C_ReceiveAck();
}
I2C_Stop();
}

void I2C_ReceiveFromSubAddress(byte SlaveAddress,byte SubAddress,byte *pRData,uchar N)
{uchar i;
I2C_Start();
I2C_SendByte(SlaveAddress);//send slave address(write device)
I2C_ReceiveAck();
I2C_SendByte(SubAddress);//send sub address
I2C_ReceiveAck();
I2C_Start();//I2C Start Again!
I2C_SendByte(SlaveAddress+1);//send slave address(read device)
I2C_ReceiveAck();
for(i=0;i{
pRData[i]=I2C_ReceiveByte();
I2C_SendAck();
}
pRData[i]=I2C_ReceiveByte();
I2C_SendNoAck();
I2C_Stop();
}

main()
{byte *pData;
byte a[16]={0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};
pData=a;
I2C_ReceiveFromSubAddress(0xA0,0x20,pData,16);
I2C_SendToSubAddress(0xA0,0,pData,16);
}