利用stm32f103的TIM2實(shí)現精確延時(shí)

{TIMx->CNT = 0;}void TIM2_Delay_ms(unsigned int cms){unsigned short temp = 0;TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);TIM_TimeBaseStructure.TIM_Prescaler = 36000 - 1;TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Down;TIM_TimeBaseStructure.TIM_Period = cms * 2;TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);TIM_Cmd(TIM2, ENABLE);do{temp = TIM_GetCounter(TIM2);}while(temp != 0x01);/*此處不能計數到0*/TIM_Cmd(TIM2, DISABLE);TIM_ResetCounter(TIM2);/*將計數寄存器的值恢復為0是必須的*/}