Linux USB gadget設備驅動解析（4）--編寫一個gadget驅動

value = min(w_length, (u16) sizeof device_desc);

memcpy(req->buf, device_desc, value);

break;

case USB_DT_CONFIG: //獲取配置，注意：會(huì )根據fs_loopback_function讀取到接口、端點描述符，注意通過config_buf完成讀取數據及數量的統計。

value = config_buf(gadget, req->buf,

w_value >> 8,

w_value 0xff);

if (value >= 0)

value = min(w_length, (u16) value);

break;

case USB_DT_STRING:

value = usb_gadget_get_string(stringtab,

w_value 0xff, req->buf);

if (value >= 0)

value = min(w_length, (u16) value);

break;

}

break;

case USB_REQ_SET_CONFIGURATION:

if (ctrl->bRequestType != 0)

goto unknown;

spin_lock(dev->lock);

value = zero_set_config(dev, w_value);//激活相應的端點

spin_unlock(dev->lock);

break;

default:

unknown:

printk(

unknown control req%02x.%02x v%04x i%04x l%dn,

ctrl->bRequestType, ctrl->bRequest,

w_value, w_index, w_length);

}

/* respond with data transfer before status phase */

if (value >= 0) {

req->length = value;

req->zero = value w_length;

value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);//通過端點0完成setup

if (value 0) {

printk(ep_queue --> %dn, value);

req->status = 0;

zero_setup_complete(gadget->ep0, req);

}

}

/* device either stalls (value 0) or reports success */

return value;

}

static void zero_unbind(struct usb_gadget *gadget) //解除綁定

{

struct zero_dev *dev = get_gadget_data(gadget);

printk(unbindn);

unregister_chrdev_region (MKDEV (usb_zero_major, 0), 1);

cdev_del ((dev->cdev));

/* we've already been disconnected ... no i/o is active */

if (dev->req) {

dev->req->length = USB_BUFSIZ;

free_ep_req(gadget->ep0, dev->req);

}

kfree(dev);

set_gadget_data(gadget, NULL);

}

static int __init zero_bind(struct usb_gadget *gadget) //綁定過程

{

struct zero_dev *dev;

struct usb_ep *ep;

int gcnum;

usb_ep_autoconfig_reset(gadget);

ep = usb_ep_autoconfig(gadget, fs_sink_desc);//根據端點描述符及控制器端點情況，分配一個合適的端點。

if (!ep)

goto enomem;

EP_OUT_NAME = ep->name; //記錄名稱

gcnum = usb_gadget_controller_number(gadget);//獲得控制器代號

if (gcnum >= 0)

device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);//賦值設備描述符

else {

pr_warning(%s: controller '%s' not recognizedn,

shortname, gadget->name);

device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);

}

dev = kzalloc(sizeof(*dev), GFP_KERNEL); //分配設備結構體

if (!dev)

return -ENOMEM;

spin_lock_init(dev->lock);

dev->gadget = gadget;

set_gadget_data(gadget, dev);

dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);//分配一個請求

if (!dev->req)

goto enomem;

dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);

if (!dev->req->buf)

goto enomem;

dev->req->complete = zero_setup_complete;

dev->out_ep=ep; //記錄端點(就是接收host端數據的端點)

printk(name=%sn,dev->out_ep->name); //打印出這個端點的名稱

ep->driver_data=dev;

device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;

usb_gadget_set_selfpowered(gadget);

gadget->ep0->driver_data = dev;

snprintf(manufacturer, sizeof manufacturer, %s %s with %s,

init_utsname()->sysname, init_utsname()->release,

gadget->name);

/**************************字符設備注冊*******************/

dev_t usb_zero_dev = MKDEV (usb_zero_major, 0);

int result = register_chrdev_region (usb_zero_dev, 1, usb_zero);

if (result 0)

{

printk (KERN_NOTICE Unable to get usb_transfer region, error %dn,result);

return 0;

}

usb_zero_setup_cdev (dev, 0);

return 0;

enomem:

zero_unbind(gadget);

return -ENOMEM;

}

/*-------------------------------------------------------------------------*/

static struct usb_gadget_driver zero_driver = { //gadget驅動的核心數據結構

#ifdef CONFIG_USB_GADGET_DUALSPEED

.speed = USB_SPEED_HIGH,

#else

.speed = USB_SPEED_FULL,

#endif

.function = (char *) longname,

.bind = zero_bind,

.unbind = __exit_p(zero_unbind),

.setup = zero_setup,