用ARM對FPGA進(jìn)行配置的原理與方法

static AT91PS_PIO pioc;

inline void pioc_out_0 (int mask)

{

pioc->PIO_CODR = mask;

}

inline void pioc_out_1 (int mask)

{

pioc->PIO_SODR = mask;

}

inline int pioc_in (int mask)

{

return pioc->PIO_PDSR mask;

}

inline void xmit_byte (char c)

{

int i;

for (i = 0; i 8; i++)

{

if (c 1)

pioc_out_1 (DATA0);

else

pioc_out_0 (DATA0);

pioc_out_0 (DCLK);

pioc_out_1 (DCLK);

c >>= 1;

}

}

void pioc_setup ()

{

pioc->PIO_PER =DATA0 | nCONFIG | DCLK | nSTATUS | CONF_DONE;

pioc->PIO_OER =DATA0 | nCONFIG | DCLK;

pioc->PIO_ODR =nSTATUS | CONF_DONE;

pioc->PIO_IFER =nSTATUS | CONF_DONE;

pioc->PIO_CODR =DATA0 | nCONFIG | DCLK;

pioc->PIO_IDR =DATA0 | nCONFIG | DCLK | nSTATUS | CONF_DONE;

pioc->PIO_MDDR =DATA0 | nCONFIG | DCLK;

pioc->PIO_PPUDR =DATA0 | nCONFIG | DCLK | nSTATUS | CONF_DONE;

pioc->PIO_OWDR =DATA0 | nCONFIG | DCLK | nSTATUS | CONF_DONE;

}

int pioc_map ()

{

int fd;

off_t addr = 0xFFFFF800; // PIO controller C

static void *base;

if ((fd = open (/dev/mem, O_RDWR | O_SYNC)) == -1)

{

printf (Cannot open /dev/mem. );

return 0;

}

printf (/dev/mem opened. );

base = mmap (0, MAP_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, addr ~MAP_MASK);